Larger text  Smaller text

Dutch Fork to be refilled starting next fall

Q&A with Ted Danson, author of ‘Oceana’

Actor and activist says oceans can recover from overfishing and acidification, but only with our help.

Tue, May 03 2011 at 7:38 AM EST

Comments

Photo: Kate Danson

MNN: What is this book about and why did you decide to write it?

Ted Danson: This book is about the crisis in ouroceans: How did we get here and how do we bring it back to abundance and health. I decided to finally sit down and write it because science is saying we are coming to a tipping point. And science also shows that our oceans can bounce back if we make some necessary changes. People should read this book and be worried about the state of the oceans but they should also walk away feeling hopeful and empowered, knowing that we still have time to solve this problem.

What influenced your dedication to the oceans growing up?

My father was an anthropologist and my mother was a very spiritual person. They taught me that we are part of the world we live in and that we have to understand it and be good stewards. I also had the benefit of having Hopi friends as a kid in Arizona and their appreciation for the natural world had a great influence on me. And while I grew up in Arizona, I always enjoyed the ocean on visits to see family in California. I had a very vivid dream when I was 7 years old. I had a high fever and I woke up screaming and I ran into my parents’ room. They asked me what was wrong and I described my nightmare. I was sitting on the beach and God’s voice said, “Ted, you have one hour to enter the oceans into this bucket,” and then he gave me a spoon with holes in it. Typical young actor’s megalomania in development, maybe, but you’d have to say I’ve been thinking about the oceans for many years!

Earn Points What’s this?

• Comments
• Email
• Twitter
• Stumble
• Digg
• Share

Why did you feel the need to become an ocean activist?

During my fifth season doing “Cheers” I was living in Santa Monica. I was taking a walk with my daughters on the beach and we came to a sign that read: “Water polluted, no swimming.” I didn’t know how to explain to them why the beach was closed. That was my call to action.

What was the first issue you took on as an ocean activist and what are some of the lessons you learned during those early years of activism?

In the 1980s, the debate on offshore drilling was starting up again. Occidental Petroleum was attempting to start slant drilling off the coast of Malibu. With the help of my friend Robert Sulnick, we set out to protect our coast from offshore drilling — and won. And, then we realized we could do a lot more and started our own oceans organization, American Oceans Campaign. During those early years I learned how much hard work it takes to be successful. I also learned that in order to be effective in conservation you need to rely on science. I have been so lucky to have been able to work with some of the finest ocean scientists and experts in the world.

What is the state of fisheries around the world today?

Eighty percent of seafood fisheries are at their limit of exploitation or already in collapse. We are destroying the oceans from the top down and from the bottom up, and not giving them a chance to recover. We overfish using illegal and destructive methods to take out too many fish. Ninety percent of the large predator fish — sharks, tuna, marlin — in the oceans have disappeared. Carbon emissions cause climate change and ocean acidification, which attacks the lowest level of the food chain, harming coral reefs and killing off food that’s critical for the ocean ecosystem.

How is industrial fishing destroying our oceans and hurting the livelihood of people that depend on the ocean?

The global fishing fleet is estimated to be 2.5 times larger than what the oceans can sustain. Too often, destructive gear is used that kills everything its path. Industrial fishing ships with huge nets catch and kill marine life — dolphins, sea turtles, birds. Bottom trawlers destroy deep sea coral and other seafloor habitats, which provide critical nurseries and feeding grounds for innumerable fish and shellfish species. Destructive fishing also jeopardizes the millions of small-scale fishermen and others who have depended on the oceans for their livelihood for generations. It also threatens the nearly 3 billion people in the world who rely on animal protein that comes from the sea.

Despite all of this, you see this as a pro-fishing book. Can you explain?

I want fishermen to be able to make a living for years to come. And, I want my grandchildren to enjoy fresh, healthy seafood that comes from an abundant ocean. I also want the more than three billion people who depend on fish as a major source of animal protein to be able to continue to do so. Many fishermen know their catch is shrinking. I have spoken with fishermen over the years — some are featured in the book — and they understand, and many support, that changes need to be made in the industry to let the fish populations recover.

Can you still eat seafood while being an advocate for the ocean? Do you still eat seafood?

I love to eat seafood. We should all be able to eat seafood if we choose, and for many people it is a major source of protein. I want people to continue to be able to rely on eating seafood. But we need to start fishing smart and also eating smart. The easiest way to do this is to ask questions. What kind of fish is it? Where was it caught? How was it caught? Was it farmed? Where was it farmed? One good rule of thumb is to try and eat locally caught seafood if you don’t have any more information. And, get a seafood guide. You can find them at Oceana.org and other organizations.

What is seafood fraud and how does it affect consumers?

Seafood fraud has been discovered across the United States — less expensive fish like tilapia have been passed off as grouper and red snapper, for example. It is a disturbing trend and most people don’t know they have been lied to and ripped off, and it disguises the fact that overfishing is taking place. This creates an illusion that we have an endless supply of fish when in actuality, many of these species are on the brink of collapse. The fraud undermines efforts to convince the restaurant-going/supermarket-shopping public that overfishing is a real concern. How can you believe that grouper is at risk when you can have a so-called grouper sandwich every day?

What are fishing subsidies and how do they affect the taxpaying public?

Subsidies are payments governments make to fishing companies to keep fishing. They pay for fuel, nets, trawls and even the vessels themselves. They are paying fishing boats to overfish.  Subsidies pay to maintain a global fishing fleet two-and-a-half times the capacity the oceans can sustain. This is less an issue in the U.S. Tax money pays to catch the fish, then we pay to eat the fish and we are destroying the oceans in the process, which makes the prices for fish higher.

What are flags of convenience and why are they dangerous?

Fishing ship owners flag vessels in places like Panama, the Marshall Islands or Bolivia. The ships then don’t have to adhere to stricter maritime laws from other nations. These boats can catch as many fish as they want in any manner they want. This practice leads to a more startling problem as well. These vessels skirt human rights laws and end up forcing their crew to work long hours in inhumane conditions while making pennies in comparison to the value of their catch.

How does fish farming affect the oceans and our own health?

Fish farming creates more pollution and overfishing pressure around the world. Irresponsible fish farms pollute with fish waste and introduce dangerous chemicals into the food chain (that we then can ingest). It takes up to 5 pounds of smaller fish — all of which are important species to the marine environment and many of which are edible for humans — to create 1 pound of farmed salmon, resulting in a net loss of protein.

How are offshore drilling and climate change related to the failing health of the oceans?

Offshore drilling can pollute the ocean even when there are no accidents because of how it takes place and the many opportunities for oil to end up in the sea. Drilling in the oceans continues to enable our dependence on oil and puts more carbon dioxide into our atmosphere, which leads to rising ocean temperatures and acidification.

What is ocean acidification?

We have filled our atmosphere, and our oceans, with carbon dioxide. As a result, the oceans’ pH balance is out of whack, and the water is becoming more acidic. Acidification prevents animals that build shells and skeletons out of calcium from doing so. Those animals, such as krill and coral reefs for example, are the heart of the ocean food web. Corals provide a home for 25 percent of marine life.

Considering your start in conservation, what were some of your thoughts as you learned about the Gulf of Mexico oil spill?

I was upset for the people in the Gulf. It didn’t need to happen again. This is the same cycle we have seen since the Santa Barbara spill in 1969. We have an oil spill. We react and stop offshore drilling. We are then lulled into a false sense of security because there has not been an accident in years. We loosen regulations. There is another disaster. I am hopeful that we can fix this, though.

What has happened since the BP spill and what still needs to happen?

The Obama administration has removed most of the U.S. coastline from drilling plans, except where drilling is already taking place and part of the Arctic. It’s a step forward, but it’s not enough. Offshore drilling will never be 100-percent accident-free, and we need better monitoring of the oil rigs that are still out on the water. We also need to have a strong commitment to invest in and implement clean energy technology — offshore wind has the potential to generate 30 percent more electricity than offshore oil and gas resources combined.

What can be done to bring the oceans back to health? What can individuals do in their everyday lives to help the oceans?

We need active enforcement of laws already on the books, and governments must stop distributing fishing subsidies that allow overfishing. We need a reduction in the size of the fishing fleet and the most harmful fishing gear should be eliminated. Nations around the world also need to protect habitat and allow fish populations to bounce back. Groups that manage fisheries internationally need to start protecting some of the species that are at risk like bluefin tuna, sharks, swordfish and forage species like krill. As for individuals, my first piece of advice would be to go and enjoy the oceans. Go for a walk on the beach, surf, fish, swim, boat, whatever you like. The more of us that are connected to the oceans the better. And, getting involved is fun and you can make a difference. You can join a group that works on ocean issues, like Oceana. Vote for representatives that want to improve the ocean’s health. And you can eat sustainable seafood and avoid products that are harmful to the oceans. We also need to manage what we put in the environment by reducing our plastic use and conserving our energy use.

Are you optimistic about the future of our oceans?

Yes, I am optimistic, and here’s why: The oceans are resilient. Fish populations can bounce back if given a breather from intense fishing pressure. And, I’ve been doing this for years and I am so impressed by how many more people are becoming aware of the importance of conservation all the time. Most of the oceans’ most vibrant ecosystems — coral reefs, for example — are near coastlines, and people are motivated to save them. We are getting the will, and now we just have to find the way.

This Q&A was provided by Rodale Books, publisher of “Oceana.”

Click on the link below to see how easy fishiding is to install. Self contained units which require no tools or additional parts/materials. Units come in either 8″ or 10″ tall boxes, ready to be bent to shape. The pliable pvc material bends easily by hand to unlimited shapes and angles. Maximum shade is cast by the wide limbs which grow algae fast. Bass, Crappie, Panfish are just a few of the species that love this new reclaimed, environmentaly friendly fish habitat. Numerous sizes are available form aquariums to the oceans. Various textures provide cover for newly hatched fry to full grown predators.

fishiding installation of artificial fish habitat/fish attractors

fishiding.com

Structure Fishing 101

written by Tim Allard

Structures are a big factor in fish habitat and certain types will concentrate fish.

Structures are areas where there is a variance in the depth or contours of the lake bottom.

If you’re new to fishing, knowing how to find structure and understanding how fish relate to it will dramatically improve your ability to find and catch fish. As a term, structure gets used a lot in fishing articles, television shows and presentations by professional anglers. In this guide I’ll define structure, discuss various types and share some tips for fishing them.

What is structure?

Structures are the physical features of a lake or a river bottom. From a fishing perspective, structures are areas where there is a variance in the depth or the contours of the bottom, and these changes can range from subtle to dramatic. Structures can be natural as well as human-made features of the underwater landscape. Structures are a big factor in fish habitat and certain types will concentrate fish.

Before I get any further, let me explain what structure is not. Sometimes cover is incorrectly used interchangeably with structure. Cover refers to objects in or on the water that provide shelter for fish, such as vegetation or a dock. Of course, finding structure and cover together can make great fishing spots (e.g., a hump with a dense weed bed), so it’s no surprise that the two terms get used interchangeably.

Some Basic Structures

Here are some common fishing-structures. A ledge is the beginning of a distinct change in depth. It marks the top of a drop, which is simply the sloping of the bottom towards deeper water. Ledges and drops are main structures that hold many freshwater species, such as walleye and muskie. Add a weedline in close proximity to a ledge or a drop and they can be prime spots.

A hump is a shallow area surrounded by deeper water and often a preferred piece of structure for bass. Humps are sometimes called underwater islands. A hole is the inverse of a hump – a deep pocket in the bottom surrounded by shallow water. Holes are favorite hiding spots of bottom-dwelling hunters, like catfish.

More Advanced Structures

The above items are some basic structures, but they also form the building blocks for more elaborate pieces of structures. What follows are some of the more common fishing structures, but this listing is by no means exhaustive.

One example is a spine. To imagine a spine, first picture an underwater hump as an elastic band. Take that band, stretch it slightly and you’ve got a spine. One of the most common places to find spines is as a continuation or off of a point from a shoreline, but others exist off the end of humps as well.

The contour of spines will vary, some even have fingers running off the sides of them, and their gradient, or slope, will also vary from steep to subtle. Like a hump, spines are surrounded by deeper water, with drops and edges on each of their sides. Long spines can be travel routes for fish as they move towards shore, transitioning from deep to shallow water.

The inverse of a spine is a cut, or trough, which can be described as elongated holes. Most common in flooded areas or reservoirs, many of these structures were streambeds in their former lives before water levels rose above their banks, submerging them. Of course, drops can sometimes contain cuts in their sides that are simply grooves that were not previously riverbeds. Again, these irregularities can attract fish and are worthy of fishing and their ledges can be particularly effective at holding fish or acting as route ways.

Still got that elastic? Holding both ends, bring them together slightly until the band bows. You’ve just created a saddle between two islands or underwater humps (your finger tips). Saddles can be great structures to fish with both deep and shallow water structures as well as being corridors for fish to follow as they move from one structure to the next. Depending on their disposition, fish may be anywhere on the saddle complex. They may be tight to the islands and feeding or positioned slightly off the saddle and inactive. In this case, it pays to know the behaviors of your target species and fish these areas accordingly, but when in doubt, pick the structure apart with different lures to work a variety of depths.

Another piece of structure is the breakline (sometimes shortened to break). A breakline is really just the edge of a drop that runs perpendicular to the shoreline. If you’ve ever trolled along the shore in an S-pattern, running between shallow and deep water, you’ve been fishing the breakline. Sometimes anglers will describe the different breaks as primary and secondary. The primary breakline is the first sharp drop in depth traveling from shore outward; the secondary following thereafter and another major drop in depth. Whether you think of breaks as walls or underwater stairs, they can be good structures to fish. Yet the entire breakline does not always hold fish. What makes them great fish-holding structures is when other elements (like a cut or a bend) or cover (such as a weed edge) are added to a stretch of the break.

Why is Structure Important?

Structure often concentrates fish. Structures provide different advantages to various species (such as corralling baitfish, providing an ambush area, or being close to deep water for comfort). For reasons like the three listed above, many species seldom stray far from structure. Learning how the fish you’re targeting relates to structure and being able to find structure on the water will increase your ability to catch fish. Structures can move you away from shorelines to intimidating expanses of water that may seem void on the surface, but what lies underneath can be fishing hotspots.

Putting Structure in Context

It’s important to keep in mind that structure is but one factor in the finding-fish equation. Finding structure can put you on fish, but it’s not an absolute that you’ll catch them. Structures are often feeding areas, but if there’s no food they’ll likely not hold fish. Weather conditions and seasonal patterns are also important to keep in mind and, again, are part of a larger equation to finding fish.

Other factors affecting if structures hold fish are temperature, oxygen supply, or water quality/light penetration. Since different species have different dispositions, some structures may appeal to certain fish and not others. For example, a 12-foot hump on a gin-clear, rock bottom lake may be a smallmouth bass hotspot, but too bright an area for walleye during the day. Yet at dusk and dawn it might concentrate light-sensitive walleye that move in to feed and ambush prey. Sometimes how well structures produce fish is all about timing and putting environmental and forage factors in your favor.

Using hydrographic maps and fish finders together can make finding structure a relative easy task.

How Fish Relate To Structure

As mentioned, food and environmental factors impact the mood of fish and thus, impact how they relate to structure. A common misnomer is that if fish are not directly on top of structure, they are not there or are not relating to it. Speaking in general terms, fish “on” structure are usually aggressive (add cover to the mix and things could change), while fish suspended “off” of structure are less aggressive or in a neutral mood, resting between feeding binges (unless baitfish are also suspended off the structure). Fish distanced from structure are still relating to it and catchable, so novice anglers should learn to fish both the actual structure as well as its surroundings. It pays to ask, “How do the fish travel to this spot? Is there an obvious route on my hydrographic map?” and “If fish are not directly on the structure, where might they be off of it?”

The Tools of the Trade & Finding Structure

As mentioned earlier, the easiest structures to find are those that extend from land, such as a point. The reason is obvious; one sees the gradual slope on land and knows this piece of structure likely continues into the water. What’s difficult is finding structure when there are not hints from land. This is where a fishing finder and hydrographic maps are critical.

Hydrographic maps illustrate the bottom contours and depths, showing where the structures are on a body of water. Of course the scale of the map will impact the detail of the features it shows. Depth finders are your underwater eyes. They provide a continual reading of the depth below your boat, and help you pinpoint depth changes and find structure. Using hydrographic maps and fish finders together can make finding structure a relative easy task, even on a new lake.

A recent addition to an angler’s arsenal are GPS units, which can hold hydrographic maps as well as store waypoints, allowing you to mark structure once you find it. Of course, carrying some buoys is also handy to help you stay on structure as you fish the entire area.

Tips for Fishing Structure

I won’t try and cover how-to fish the various types of structure in one article, but I will suggest a few tips. First off, working jigs along the bottom and around the edges of structure can catch several species of fish, anglers should not just concentrate on the bottom (whether using jigs or not). Consider trying lures to work other depths around the structures. Also, try and fish “off” of structure as mentioned earlier. By this I mean if trolling the breakline, weave out into deeper water to look for suspended fish. The same concept applies when casting areas, like humps, islands and saddles.

Here’s a tip: fish sometimes suspend off of structure around the same depth as the structure itself. So, a hump that’s 12-feet deep might have a pike several feet away from the edge of the structure, suspended at 12-feet over water with a depth of 25-feet. Another important tip, which I’ve touched on already, is learning to isolate prime structure by considering other factors influencing fish behavior (such as food, cover, environmental elements, and so on).

Once you’ve done your homework and found structure you think will hold fish – take the time and fish it thoroughly. Many anglers work large structures too quickly, and if a big trophy is relating to a certain, special area on the structure (often called “the spot on the spot”) you might pass over her.

Learning about structure is just another way of thinking to solve the “Where are the fish today?” puzzle. Use maps and read up on your favorite species and how they relate to structure and you’ll find yourself catching more fish. Large pieces of structure can be intimidating to fish, so take the time to look for the best areas (considering other fish-factors) and fish them thoroughly.
Share this article with your fellow outdoorsmen:

Ohio Pond Management
Increasing Fish Production
Methods of Increasing Fish Production
Fertilization
Artificial Feeding
Adding Fish Habitat Structures

Pond owners should view their ponds as selfsustaining bodies of water that are capable of providing all of the ingredients necessary for good fish production. The amount of fishes that can be harvested depends upon a pond’s ability to produce them, and this amount varies from pond to pond. Ohio ponds can often support up to 250 pounds of fish per acre, although this amount is generally less for ponds that are smaller than one acre. If a pond’s normal fish production is less than what the pond owner deems acceptable, it may be possible to enhance production.

The most effective methods to artificially increase fish production are pond fertilization and fish feeding (pellet feeding pictured). However, each of these methods can also cause pond problems, so pond owners should consider them only after carefully weighing the trade offs associated with trying to increase fish production.

Fertilization
Fertilization can improve fish production by increasing the production of tiny plants and animals at the bottom of the food chain, the phytoplankton and zooplankton. This increase in production at the bottom of the food web may ultimately translate into improved growth and production of sport fish. However, negative impacts from fertilization can also result if the added nutrients stimulate growth of undesirable types of aquatic vegetation and algae. Whereas excess vegetation can be a problem to anglers and swimmers during warm weather months, it can also make the pond more susceptible to fish kills due to a build-up of dead and decaying plant material. The pond owner may find that the cost of fertilizer, effort to maintain a fertilization program, and risk of fish kills outweigh the benefits of the increase in fish harvested.

Most ponds in Ohio are adequately supplied with nutrients from the surrounding watershed and should not require artificial fertilization. In fact, many ponds receive so many nutrients from the watershed alone that problems develop with growth of excess vegetation and reductions in water quality. The following criteria should be met if a pond is to be considered for fertilization: 1) the watershed to pond ratio is less than 20 acres of watershed per surface acre of pond, 2) the watershed consists primarily of woodland acreage with soils that are low in fertility, and 3) the pond has a minimal amount of shallow water and most of the shoreline has the recommended 3:1 slope to discourage the growth of aquatic vegetation. Ponds without these characteristics should not be fertilized.

If fertilization is appropriate, then the pond owner needs to proceed with the proper treatment applied on a careful schedule. The recommended procedure is monthly applications of liquid fertilizers 10-34-0 (N-P-K) applied at the rate of two gallons per surface acre. Treatments should begin when water temperatures reach 60°F in the spring, and stop when water temperatures drop below 60°F in the fall. Fertilization should be temporarily halted when water temperatures exceed 80°F during the summer. Dilute each gallon of fertilizer with 10 gallons of water and spray the mixture evenly over the pond surface. Water clarity is a simple and convenient way to measure the progress of a fertilization program. The water clarity should be monitored twice each month throughout the fertilization season. This is easily accomplished by simply lowering a white object into the pond, such as a coffee mug on the end of a string. The white object should be visible to at least 18 inches below the water’s surface. If the object is not visible down to 18 inches, overfertilization may be a problem. In this case, postpone the next fertilizer treatment until the water has cleared somewhat and remeasure water clarity.

Artificial Feeding
Feeding is the most direct and reliable method to increase production of bluegills and channel catfish in ponds that are less than five acres. Proper artificial feeding will increase fish growth and provide larger fish for anglers. Unlike fertilization, with artificial feeding all of the nutrients go directly into fish production rather than the complex food chain. For ponds less than five acres, feeding is a feasible way to increase fish production. Bluegills and channel catfish will readily eat pelleted feeds that are available at agricultural feed stores. Pellet feed containing at least 25 to 32 percent protein will produce the best growth. Largemouth bass prefer live natural foods and will seldom eat pelleted feed.

Training fishes to accept artificial pellets may take a few days. When bluegills are feeding on the surface in the evening, tossing a few floating pellets into the areas where they are feeding will teach them to eat pelleted food. Begin an artificial feeding program by feeding fish about two pounds of pellets per acre per day. This amount may be increased to 15 pounds per acre per day after they have become accustomed to being fed. The feeding rate should be adjusted in the summer according to how much the fish are eating. Feeding may slow or even cease during the summer if water temperatures get above 85°F.

The best guide to feeding fishes is to give them no more than they can eat in 15 to 20 minutes. Using floating pellets in a feeding ring is a good way to monitor how much food they are eating. A feeding station approximately three feet in diameter can be constructed by sealing the ends of a piece of corrugated field tile. Connect the ends after sealing to form a three-foot circle and place the tile in an area of the pond that can easily be reached to fill with food (pictured right).

A pond owner should be willing to make a long-term commitment to continue feeding before a feeding program starts. Feeding should begin in the spring when water temperatures reach 60°F and should stop in the fall when water temperatures drop to 60°F. Fish should be fed daily at approximately the same time and in the same place. Missing a few days of feeding while on vacation will not cause problems if feeding is consistent during the remainder of the summer. Overfeeding fish can cause many of the same problems as overfertilization. Food that is not eaten by fish will decompose and use up the pond’s dissolved oxygen (see fish kills). Decomposing food can also release nutrients into the water that may promote the growth of aquatic vegetation and algae.

Adding Fish Habitat Structures to the Pond
Habitat structures –“fish shelters,” or “fish attractors”– are primarily designed to concentrate fish and increase an angler’s chances of success. Depending upon the size and type of materials used, structures can provide cover, resting areas, and feeding areas. Habitat structures can act as substitutes for natural cover in ponds where these types of areas are lacking.

Habitat structures can be constructed from many different natural and man-made materials. Easily obtained materials such as discarded Christmas trees can be banded together, weighted and sunk, although trees such as oak, hickory, and cedar work best due to their resistance to decay (brush pile picture right) . Man-made materials such as PVC pipe, field tile, concrete block, and wooden pallets can also be fashioned into fish attracting devices. Habitat structures can be placed into the pond from the bank if the structures are not too large and there is relatively deep water near the shore. Larger structures can be placed from a boat to allow access to deeper water.

Winter ice cover provides an excellent opportunity to build and place structures too large to install from the shore or by boat. These structures can be built on the ice, or built on shore and dragged out onto the ice. In either case, the structure is placed on the ice and allowed to fall into the desired location when the ice melts (see brush piles on ice to the right).

Fishes & anglers alike will make the best use of habitat structures that are distributed carefully in the best locations. These structures are best placed in water that is within reasonable casting distance from shore & two to eight feet deep to allow consistent fish use. Habitat structures should not be placed in the deepest part of the pond where low dissolved oxygen levels (common during summer) make them inaccessible to fish.